25 Saltiga

Turning anglers' dreams into strength.

THE MOST

POWERFUL

REEL YET.

Over two decades of relentless refinement, the 25 SALTIGA stands at the pinnacle of strength and reliability. Featuring the groundbreaking POWERDRIVE DESIGN, it’s built with an uncompromising focus on power and toughness to perform when it matters most.

The Next Generation of Spinning Reels

Engineered Power
And Performance.

The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.

No Failures.
No Compromises.

When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions

Control in
Every Turn.

Smooth and controlled, even against the hardest runs. The 25 SALTIGA's POWERDRIVE DESIGN and POWERDRIVE ROTOR minimise start-up inertia, while the new DRD/ATD TOUGH DRAG system deliver constant pressure for unmatched control during the fight.

Fish Harder,
Fish Longer.

Engineered for balance and comfort, POWERDRIVE DESIGN lets you fish harder, longer, and stronger. Meticulously balanced for a better feel in hand, engineered for stamina, to keep you on the water from dawn to dusk chasing giants.

Powerdrive
Design

Powerdrive
Design

A design philosophy that pursues toughness and power above all else to deliver anglers the ultimate strength.

The next generation of large spinning reels have been designed in pursuit of powerful reliability, enabling anglers to target the largest fish around the world.

POWERDRIVE DESIGN consists of two technology units: the body unit “POWERDRIVE ENGINE” and the rotor unit “POWERDRIVE ROTOR”.

POWERDRIVE ENGINE

Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.

OVERSIZED POWER DIGIGEAR

SIZE THAT COMMANDS PERFORMANCE

Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.

ROLLER POWER OSCILLATION

SMOOTH UNDER PRESSURE

The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.

POWERDRIVE ENGINE

Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.

OVERSIZED POWER DIGIGEAR

SIZE THAT COMMANDS PERFORMANCE

Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.

ROLLER POWER OSCILLATION

SMOOTH UNDER PRESSURE

The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.

TOUGH LINE ROLLER SYSTEM

ENHANCED LINE MANAGEMENT

The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.

CRANK POWER BAIL

ALWAYS IN CONTROL

The new crank-shaped design directs line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhances opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.

POWERDRIVE ROTOR

POWER MEETS PRECISION

The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%.

The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.

POWERDRIVE ROTOR

POWER MEETS PRECISION

The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%.

The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.

TOUGH LINE ROLLER SYSTEM

ENHANCED LINE MANAGEMENT

The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.

CRANK POWER BAIL

ALWAYS IN CONTROL

The new crank-shaped design directs line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhances opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.

DRD DRAG SYSTEM

Drags that use carbon washers are highly durable, but DRD takes it to another level with a new drag mechanism designed to target larger fish. Equipped with eight metal rollers on a single metal plate, DRD controls the loss of drag force caused by frictional heat. It is smooth under pressure and is 5x times more durable.

The incredibly durable DRD Drag System is used for 18000 size and above.

ATD TOUGH DRAG SYSTEM

The ATD TOUGH DRAG delivers exceptional drag strength and smoothness. The large carbon drag stack provides anglers with the ultimate in smooth performance and reliability.

Up to 14000 size, Daiwa’s ATD Carbon washers are used for reliable and smooth drag control.

MONOCOQUE BODY

Rigid one piece body.

With support from a new full metal MONOCOQUE (MQ) body concept, 25 SALTIGA has gained extra strength and retrieve power compared to previous models.

A new MONOCOQUE (MQ) body design further enlarges internal body space to allow larger drive gear to be installed. MQ construction also allows the engine plate to replace the need for screws to stabilise the drive gear. MQ concept improves support of the internal parts and adds durability and resistance to intrusion.

LC-ABS SW

Precise line flow.

DAIWA’s “LC-ABS SW” technology enhances power and rigidity. The spool’s upper section is optimised with a two-step taper toward the spool ring, minimising friction for smoother line release.

Its narrow width prevents tangling, even during the final stages of casting with less line remaining. This design ensures smooth casting with thick lines and improves casting distance by approximately 2% providing anglers with an improved casting experience.

MAGSEALED

Performance preserved.

MAGSEALED is a technology that implements a special liquid material developed originally for aerospace engineering called MAGOIL. MAGOIL is used to create a water and dust-resistant barrier in lieu of traditional rubber seals.

This is an innovative water resistance method that maintains rotational performance. The ultimate focus of MAGSEAL was to protect the gearing inside the reel body and the bearings. Two of the key components to protect if overall performance is to be preserved.

MAGSEALED BEARING

Sealed from the elements.

MAGSEALED bearings have been designed to last longer than traditionally sealed ball bearings. The balls are encapsulated in a completely waterproof housing. The inner and outer rings are magnetised and joined by waterproof and stable MAGSEALED oil.

This means the initial performance of the reel will be indefinitely preserved. The longevity is beyond comparison to a waterproof industrial bearing.

25 SALTIGA is equipped with MAGSEALED bearings on both sides of the drive gear.

25 SALTIGA | ULTIMATE POWER

The Future Of Saltwater Angling.A continued evolution of industry leading technologies culminate to create the strongest reel DAIWA has ever produced. 25 SALTIGA will 'BREAK YOUR RECORD'.

25 SALTIGA | UNRIVALLED TECHNOLOGY

Engineered Power and Performance With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.

25 SALTIGA | BREAK YOUR RECORD

Turning Anglers' Dreams Into Strength.

OVER 20 YEARS OF CONSTANT INNOVATION

Chosen by anglers across the globe.

First introduced to the market in 2002 the SALTIGA quickly found its way to the pinnacle of saltwater spinning reel performance. 23 years later and SALTIGA continues to raise the benchmark for innovation, strength and durability.

With the birth of SALTIGA, DAIWA went out to refine a new standard for saltwater performance, and anglers are now able to target fish like never before to surpass all expectations and “BREAK YOUR RECORD”.

20 YEARS

SAM GILCHRIST | DAIWA FIELD TESTER

"Fishing up on the Great Barrier Reef it is important to have a reel you feel confident with on every cast. Cast after cast the function of the 25 SALTIGA was seamless and made me feel as though the outfit I was using perfect for the situation. The standouts for me were the smooth drag pressure and the ease of winding under pressure. Even in the areas of high current, cranking a diving popper back in against the current to make another cast was so easy making the long days on the water much more enjoyable. Once hooked up the drag performed perfectly with a smooth but strong pressure stop the fish from reaching the reef edge." - Sam Gilchrist

HIROMU SANO | DAIWA FIELD TESTER

"When I was approached to join the development team for the 25 SALTIGA, I made a few requests: lower initial crank inertia, a stronger drag system, and the inclusion of larger models. I was fortunate to test the prototype 14000-XH in New Zealand while jigging for XL Kingfish. I embraced the opportunity to test the reel’s strength and gave it a solid go. As a result of the significantly lower inertia, jigging all day—even with the XH model—was remarkably easy. I could feel the cranking power and smoothness, thanks to the OVERSIZED POWER DIGIGEAR. The reel’s overall balance is improved, making it feel incredibly well-proportioned and effortless to fish with." - Hiromu Sano